Fandom

Resident Evil Wiki

Brake Operation Manual

14,461articles on
this wiki
Add New Page
Talk0 Share

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.

The Brake Operation Manual is a file that can be found in Resident Evil Zero.

Location

The file is found in the operator cab. It is automatically obtained after the Cab cutscene.

Transcript

Using the brake control.
The following three steps are unnecessary to operate the brakes:

Step 1: Activating the controls.

Brake controls are located in the following locations

–First car driver's compartment
–Rear deck of the fifth car.
To activate the system, you must insert the magnetic card into the device in the fifth car. This will supply power to both sets of controls.


Step 2: Enter rear deck code.

Enter the code for the rear deck unit to release the lock.

After this, the driver's compartment code can be input.

Step 3: Enter driver's compartment code.

Enter the code for the driver's compartment unit to remove the lock.

Upon completion of these three steps, the manual brakes will be available for use.

Brake Operation Manual

Using the Brake control.
The following three steps are necessary to operate the brakes:

Step 1: Activating the controls.

Brake controls are located in the following locations:

- First car Driver's Compartment.
- Rear deck of the fifth car.

To activate the system, you must insert the magnetic card into the device in the fifth car. This will supply power to both sets of controls.

Step 2: Enter Rear Deck Code.

Enter the code for the rear deck unit to release the lock.

After this the Driver's Compartment code can be entered.

Step 3: Enter Driver's Compartment Code.

Enter the code for the Driver's Compartment unit to remove the lock.

Upon completion of these three steps, the manual brakes can be used.

-ブレーキ制御装置の使用について-

ブレーキ制御装置を使用するためには、以下の3つの操作が必要です。

「LEVEL1.装置の起動」

ブレーキ制御装置は、車内の以下の場所に設置されています。

・一両目運転室
・五両目後部デッキ

起動する場合は、専用磁気カードを後部デッキ側の装置に使用します。
この段階で運転室と後部デッキ両方の電源が入ります。

「LEVEL2.後部デッキコード入力」

後部デッキ側装置にコードを入力し、ロックを解除します。
入力が終了すると、運転室でのコード入力が可能になります。

「LEVEL3.運転室コード入力」

運転室側装置にコードを入力して、ロックを解除します。

以上を終了させると、手動ブレーキが使用可能になります。

Analysis

The file teaches the player how to complete the puzzle required to stop the train.

Gallery

Bibliography

Sources

Also on Fandom

Random Wiki